Electric Guns

Electric Rifle

Electric Rifle

AEG ( Airsoft Electric Guns)  are powered by  Battery.These guns use a motor and gearbox setup to pull a piston against  a spring, when the piston is released it compresses the air in the cylinder  to fire the bb.


Display per page
Sort by
1 - 50 of 55 results
Product no.: AEG G&G egc-16p-fhk-bnb-ncm

The G&G Fire Hawk made under the Combat machine range, it  is made of high quality materials  like all the G&G range, it is fitted with a the GOS V2 stock.  This has G&G's high build quality, with 8mm bearings in its V2 gearbox.
This replica is suited to short distances / C
QB.  Great Rate of fire and distinct loud sound. 

220.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG SA-C18

SA-C18 CORE™  Replica

New from Specna Arms the CORE™ line of products is an exceptional series of replicas that introduces a new quality to the market. An attractive price in combination with an innovative spring change system as well as high-quality materials makes this replica suitable for beginners and seasoned airsoft players alike.

 

185.00 / unit(s) *

Still in stock

Product no.: AEG SA-A06

Specna Arms SA-A06 carbine replica

The Specna Arms brand SA-A06 carbine replica alloy of zinc and aluminum with the use of steel elements. The SF type stock holds the battery and the pistol grip were made of polymer plastic. The replica’s body, the RIS rail set were a subject to the process of anodizing what guarantees a high level of protecting the replica against corrosion.

240.00 / unit(s) *

Still in stock

Product no.: AEG G&G EGC-16P-RDS-BNB-NCM

The G&G CM16 Raider  replica is part of the  Combat Machine Range,  The Combat Machine replicas are of high quality.  The main factor allowing to lower the price is the use of a high quality plastic bodys instead of a metal body. It is also a important fact that the body itself was made of plastic reinforced by fiberglass  - just like the front Rail, the stock or almost all plastic elements. The outer barrel, the stock’s pipe, the tactical sling attachment points, the magazine casing and most of the minor elements were made of metal. The replica is equipped with a reinforced Metal V.2 Gearbox with 8mm ball bearings.

189.00 / unit(s) *

Still in stock

Product no.: AEG G&GCM16Raiderv2

CM16 Raider 2.0 Carbine

A CM16 Raider 2.0 carbine rifle replica by G&G made as a part of the Combat Machine project whose aim is to deliver high-quality replicas at a price that may be considered economical. Combat Machine replicas are characteristic for their highest, distinctive of G&G products, craftsmanship, reliability and high quality of materials used. The main factor that allows reducing the price is the use of a high-quality glass fiber reinforced polymer instead of metal.

Polymer parts include the receiver, pistol grip, M-Lok rail, stock and muzzle. Metal parts, on the other hand, include the external barrel, stock tube, latches and majority of small elements.

The replica is perfect for operating on a medium range with a muzzle velocity of ~ FPS. The implemented top RIS rail allows for the attachment of any optical sight, whereas a telescopic stock, which holds the battery, allows for adjustment of the replica to the preferences of an individual User. The set includes a kit of flip-up iron sights.

The set does not include a battery or a charger.

189.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG CM15KRLPR13CarbineBGrey

CM15 KR-LPR 13 "replica rifle  - Battleship Grey

The  CM15 KR-LPR 13 " rifle from G & G was made as part of the Combat Machine series. , which aims to provide high-quality replicas at a good price. The main factor allowing to reduce the price is the use of a body of high-quality glass fiber reinforced plastic instead of metal. Made of plastic are the body, pistol grip, and Keymod rail system. The metal parts are the external barrel, a stock guide, sling mounts and most of the small elements.  

219.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG CM520

The CM520 replica is part of a new series of low-budget rifles from the popular  manufacturers CYMA.  The rifle has the same quality as  other products from Cyma. Thanks to the use of high-quality plastic in place of metal elements (eg. body, handguard, sights, stock, magazine)  has allowed for a reduced price. The Cyma CM522 is an aforable Aeg and Ideal for the  beginner.

Old price 155.00 €
150.00 *
You save 3 %

Still in stock

Product no.: AEG CM045A

The Cyma AKS74U CM045A  is a heavey weight, very well-made replica of the Russian AKS74U.
Its body is made of  Meta and  real wood fore grip.

Old price 245.00 €
220.00 *
You save 10 %

Still in stock

Product no.: AEG JG0638

Back In Stock Soon
This G36c is like the real steel, is made mostly of lightweight and durable plastic - ABS. The barrel is made of metal. The airsoft gun is well balanced, has ambidextrous selector lever and a folding stock. it is ideal for the beginner and great for CQB.

179.00 *

Still in stock

Product no.: AEG SA-C12HT

SA-C12 HT CORE™ Carbine Replica

Specna Arms CORE™ line of products are an exceptional series of replicas that introduces a new quality to the market. Attractive prices and high-quality materials make this replica suitable for beginners and seasoned airsoft players alike.

210.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG SA-C06

SA-C06 CORE™ Carbine Replica

New from Specna Arms the CORE™ line of products is an exceptional series of replicas that introduces a new quality to the market. An attractive price in combination with an innovative spring change system as well as high-quality materials makes this replica suitable for beginners and seasoned airsoft players alike.

 

210.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG SA-C07HT

SA-C07HT CORE™ Carbine Replica

New from Specna Arms  the  CORE™ line of products is an exceptional series of replicas that introduces a new quality to the market. An attractive price in combination with an innovative spring change system as well as high-quality materials make this replica suitable for beginners and seasoned airsoft players alike.

The receiver, stock slide and an SF stock that holds the battery, as well as the pistol grip, were made from fiber-glass reinforced polymer. 
Parts such as the barrel,  Front rail, flash hider,  charging handle and sling swivels were made of metal. 

The replica’s  is very well made all parts fit very well together.  The use of a light polymer receiver allowed for a reduced weight, which makes it very suitable for dynamic games
or long-lasting mil-sims. What’s more, fiberglass reinforcement makes the receiver also more durable than polymer and metal receivers. 

The replica is fully compatible with LiPo and LiFe batteries.

209.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG SA-H01

Specna Arms SA-H01 Assault Rifle is a full metal  416 replica. 
The battery  is mounted on the front rail in a PEQ box, both come with the replica. 
This Replica is very well made and well balanced and is on the same par with higher prices version. 
The replica features a quick spring release system, so called Enter & Convert
The replica is fully compatible with LiPo and LiFe batteries. 

Old price 315.00 €
265.00 *
You save 16 %

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG SA-C08

SA-C08 CORE™ Carbine Replica

New from Specna Arms  the  CORE™ line of products is an exceptional series of replicas that introduces a new quality to the market. An attractive price in combination with an innovative spring change system as well as high-quality materials make this replica suitable for beginners and seasoned airsoft players alike.

The receiver, stock slide and an SF stock that holds the battery, as well as the pistol grip, were made from fiber-glass reinforced polymer. 
Parts such as the barrel,  Front rail, flash hider,  charging handle and sling swivels were made of metal. 

The replica’s  is very well made all parts fit very well together.  The use of a light polymer receiver allowed for a reduced weight, which makes it very suitable for dynamic games
or long-lasting mil-sims. What’s more, fiberglass reinforcement makes the receiver also more durable than polymer and metal receivers. 

The replica is fully compatible with LiPo and LiFe batteries.

200.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG SA-C08HT

SA-C08 HT CORE™ Carbine Replica

New from Specna Arms  the  CORE™ line of products is an exceptional series of replicas that introduces a new quality to the market. An attractive price in combination with an innovative spring change system as well as high-quality materials make this replica suitable for beginners and seasoned airsoft players alike.

The receiver, stock slide and an SF stock that holds the battery, as well as the pistol grip, were made from fiber-glass reinforced polymer. 
Parts such as the barrel,  Front rail, flash hider,  charging handle and sling swivels were made of metal. 

The replica’s  is very well made all parts fit very well together.  The use of a light polymer receiver allowed for a reduced weight, which makes it very suitable for dynamic games
or long-lasting mil-sims. What’s more, fiberglass reinforcement makes the receiver also more durable than polymer and metal receivers. 

The replica is fully compatible with LiPo and LiFe batteries.

200.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG SA-B13

SA-B13 KeyMod 10” Carbine Replica

.
The body of the replica has undergone a process of anodizing, which guarantees a high level of protection against corrosion.
The paint job was conducted by powder coating, after the surface has been sandblasted beforehand. Such a way of applying the paint provides a higher than usual paint resistance against abrasion. 

Specna Arms Replicas are built to a high  standard usually foound in more expensive replaicas. 

The replica has a top, 22mm, RIS rail and an adjustable stock. The top RIS rail features flip-up iron sights, which can be easily detached and replaced with any optical sight.
A collapsible stock with an anti-slip texture stockpad allows the user to adjust the length of the replica.

270.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG CM077

Cyma CM077

The CM077  is a modified version of a standard AK replica, A new stock,  rail on the top cover and the polymer handguard. 
Elements such as the receiver, mock gas pipe, muzzle device and the top cover were made of steel. However, other miscellaneous metal elements were made of zinc alloy and aluminum. 
An ergonomic and comfortable pistol grip, a comfortable fixed stock and Handguard were made of a reinforced polymer in a black.
The dust / top cover features a  22 mm Ris rail which enables the attachment of various scopes or red dot sights - there is no need for the so-called “dovetail joint” mounts. 
The handguard is compatible with MLOK mounting system for accessories such as rails or tactical grips.

The barrel of the replica has a custom muzzle device based on a 14 mm CCW thread.

The replica features a  very durable V3 gearbox. It was additionally modified and equipped with a reinforced gearbox frame. Other reinforced parts are 7 mm steel slide bearings,
reinforced steel gears, piston head
 and bearing spring guide.

240.00 *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG JG0538

This G36cv is like the real steel, is made mostly of lightweight and durable plastic - ABS. The barrel is made of metal. The airsoft gun is well balanced, has ambidextrous selector lever and a folding stock.
it is ideal for the beginner and great for CQB.
This version has the new type Stock. 

185.00 *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG CM518DE

The Cyma CM518 is a new budget replica from one of the most popular manufacturers.
The  high-quality plastic in place of elements made of metal (eg. body, handguard) means a  reduced price and weight
Perfect for the younger player or those on a budget.
This replica has a Cyma metal gearbox, which is the same standard as there full metal Replicas. 

155.00 *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG CM515

Back in stock soon
The Cyma CM515 is  a new replica in a series of low-budget rifles from  one of the most popular  manufacturers in the worldA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights, buffer tube, flash hider, magazine) allowed reduced the price. Now, every beginner will be able to afford to buy their favorite rifle and start Airsoft  with a reliable replica for lower price.

Old price 160.00 €
150.00 *
You save 6 %

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG CM516T

The Cyma CM516 is  a new replica in a series of low-budget rifles from  one of the most popular  manufacturers in the world. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights, buffer tube, flash hider, magazine) allowed reduced the price. Now, every beginner will be able to afford to buy their favorite rifle and start Airsoft  with a reliable replica for lower price.

Old price 155.00 €
150.00 *
You save 3 %

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG CM516

The Cyma CM516 is  a new replica in a series of low-budget rifles from  one of the most popular  manufacturers in the world. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights, buffer tube, flash hider, magazine) allowed reduced the price. Now, every beginner will be able to afford to buy their favorite rifle and start Airsoft  with a reliable replica for lower price.

Old price 155.00 €
150.00 *
You save 3 %

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG CM501


The Cyma CM501 is  a new replica in a series of low-budget rifles from  one of the most popular  manufacturers. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights, buffer tube, flash hider, magazine) allowed reduced the price. Now every beginner will be able to afford to buy their favorite rifle and start Airsoft  with a reliable replica for lower price.

Old price 160.00 €
150.00 *
You save 6 %

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG SA-H02

Specna Arms SA-H02 Assault Rifle is a full metal  416 replica. 
The battery fits into the  SF stock which is made from polymer and also is the pistol grip.  
This Replica is very well made with no stock wobble, well balanced and is on the same par with higher prices version. 
The replica features a quick spring release system, so-called Enter & Convert
The replica is fully compatible with LiPo and LiFe batteries. 

285.00 *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG SA-C05

SA-C05 CORE™ Carbine Replica

New from Specna Arms  the  CORE™ line of products is an exceptional series of replicas that introduces a new quality to the market. An attractive price in combination with an innovative spring change system as well as high-quality materials make this replica suitable for beginners and seasoned airsoft players alike.

The receiver, stock slide and an SF stock that holds the battery, as well as the pistol grip, were made from fiber-glass reinforced polymer. 
Parts such as the barrel,  Front rail, flash hider,  charging handle and sling swivels were made of metal. 


The silencer is a 14 mm left-handed thread. 

The replica’s  is very well made all parts fit very well together.  The use of a light polymer receiver allowed for a reduced weight, which makes it very suitable for dynamic games

or long-lasting mil-sims. What’s more, fiberglass reinforcement makes the receiver also more durable than polymer and metal receivers. 

The replica is fully compatible with LiPo and LiFe batteries.

199.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG SA-A03

 

The Specna Arms replicas  are built to a very high standard, which was only  previously seen with makes such as  G&P, Classic Army and VFC replicas.
The replica uses a quick spring change system called "Enter & Convert".
The replica can be used with  LiPo and LiFe type batteries.
The gearbox which is reinforced on the height of the cylinder’s head, and also 8mm ball bearings and steel Gears are used.  A  light, polycarbonate one steel tooth piston,
a type 2 cylinder, asteel cut off and metal hop up unit are installed on this replica. The internals and barrel are fully upgradable.

The replica is equipped with a top 22mm RIS rail, a set flip up iron sights, which can be removed,  and an adjustable stock.
This  replica  is also equipped with a working bolt catch.

255.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG CM041B

 

The replica is made  mostly of  metal, only the lower part of the body and pistol grip are made from ABS as it is with the real steal Mp5.
The CM041B come with metal front rails., And is a excellent version of the Mp5.
 

235.00 *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG ICS-172

ICS  CXP-15 Keymod Pistol  (SportsLine  ICS-172 )

The  CXP-15 is made of tough  compact plastic.  The Keymod type RIS slides off by removing a pin,
This makes it fast and easy to fit the  battery.
The AEG is front wired for 7.4v Li-Po battery pack.
The ICS Split gear box makes  maintenance very easy. 

199.00 *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG JG608Tan

This G36c is like the real steel, is made mostly of lightweight and durable plastic - ABS. The barrel is made of metal. The airsoft gun is well balanced, has ambidextrous selector  and a folding stock.
it is ideal for the beginner up to the seasoned player, and great for CQB.
 

179.00 *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG ICS-262 CXP-UK1 CAPTAIN MTR

ICS-262 CXP-UK1 CAPTAIN MTR

The  CXP-UK1 comes with a number of preinstalled up grades as  standard,  an ICS POM reinforced piston, metal hop up unit and a reinforced pinion and bevel gear. These enhancements make it one of the most durable AEGs out of the box. The body pins have tracks on them keeping them attached to the lower receiver when disassembling the gun. The gun also has an ambidextrous charging handle allowing both right handed and left handed shooter to be comfortable. 

315.00 *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG JG0538Tan

This G36cv is like the real steel, is made mostly of lightweight and durable plastic - ABS. The barrel is made of metal. The airsoft gun is well balanced, has ambidextrous selector lever and a folding stock.
it is ideal for the beginner up to the seasoned player, and great for CQB.
This version has the new CV type Stock. 

195.00 *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG G&G EGC-16P-RDS-BNB-NCMCombo

The G&G CM16 Raider replica is part of the Combat Machine Range, These are  high quality and possibly the best in there price range.  The body, rail and stock is made of plastic reinforced by fiberglass . The outer barrel, the stock’s pipe, the tactical sling attachment points, the magazine casing and most of the minor elements were made of metal. The replica is equipped with a reinforced Metal V.2 Gearbox with 8mm ball bearings.
Smart Charger &  1600 9.6v Battery Included

235.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG CM041

The replica is made  mostly of  metal, only the lower part of the body and pistol grip are made from ABS.
The Diameter of the inner barrel is 6.04. which gives very good Grouping and accuracy.
This version has a folding stock, and front grip, which has  3 RIS rails (on  the bottom and on both sides).
 

235.00 *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG CM522

The CM522 replica is part of a new series of low-budget rifles from the popular  manufacturers CYMA.  The rifle has the same quality as  other products from Cyma. Thanks to the use of high-quality plastic in place of metal elements (eg. body, handguard, sights, stock, magazine)  has allowed for a reduced price. The Cyma CM522 is an aforable Aeg and Ideal for the  beginner.

Old price 160.00 €
155.00 *
You save 3 %

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG KAThompsonM1A1

The Thompson M1A1, manufactured by King Arms, is an accurate and well built replica. 
The Thompson M1A1 uses King Arms full steel gears with 9mm bearings, oil-less bushings and metal gearbox. 
The body of the Replica is made from metal, the stock  is made from convincing looking faux-wood ABS.
 Its “peep sight” adjusts for windage and elevation without the need for tools.
The Thompson 1928 Drum Magazine is compatible with the M1A1 model.
 

Old price 250.00 €
220.00 *
You save 12 %

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG ICS-272 CXP-HOG QRS

ICS-272 CXP-HOG QRS

New From ICS the CXP-HOG, (HOG = High Occupancy Handguard)  is full metal with the   latest keymod handguard. The high occupancy system allows  players to install a  multiplicity of tactical accessories. The new short barrel design has a very  modern style. 

Old price 409.00 €
395.00 *
You save 3 %

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG G&G egc-16p-car-bnb-ncm

The G&G CM16 Carbine  replica is part of the  Combat Machine Range,  The Combat Machine replicas are of high quality.  The main factor allowing to lower the price is the use of a high quality plastic bodys instead of a metal body. It is also a important fact that the body itself was made of plastic reinforced by fiberglass  - just like the front grip, the stock or almost all plastic elements. The outer barrel, the stock’s pipe, the tactical sling attachment points, the magazine casing and most of the minor elements were made of metal. The replica is equipped with a reinforced Metal V.2 Gearbox with 8mm ball bearings.

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG ICS-272-1 CXP-HOG QRS TAN

ICS-272-1 CXP-HOG QRS Tan

New From ICS the CXP-HOG, (HOG = High Occupancy Handguard)  is full metal with the   latest keymod handguard. The high occupancy system allows  players to install a  multiplicity of tactical accessories. The new short barrel design has a very  modern style. 

Old price 409.00 €
395.00 *
You save 3 %

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG SRT12

SPARTAC  is a new company  meeting  the needs of those who are looking for good quality for reasonable price. The main factor allowing for  lower  price is substitution of metal by good quality plastic in production of some elements including the receiver. The Spartac SRT-12 has a metal V3 gearbox and  majority of the main components of the replica was made of plastic. These are: the receiver, the dust cover, the magazine, mock gaspipe, stock, pistol grip, front guard together with an upper hand guard,  The outer barrel, fire selector and the sling catch are made of steel.  The battery is situated inside the the butt stock. The  hop-up  is  located  by pulling the  bolt back,  This Replica had a 455mm good qualty barrel installed, which gives surprising range and accuracy.

170.00 *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG CM011

The Cyma G36c is like the real steel, is made mostly of lightweight and durable plastic - ABS. The barrel is made of metal. The airsoft gun is well balanced, has ambidextrous selector lever and a folding stock. it is ideal for the beginner and great for CQB.

179.00 *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG CM032DMR

New from  Cyma, The  M14 DMR  is made of metal and ABS. 
The Wood look Body is made from high quality ABS
Sights , barrel, magazine and sling swivels are made of metal. 
Fires Full auto and Semi. 
The differance between this and the Standard CM032 M14 is the addition of a pistol grip and the different shape to the stock. 
Internal are and other parts are the same high quality as  Cyma's CM032 M14. 

 

Old price 220.00 €
210.00 *
You save 5 %

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG G&G egc-16p-rdl-bnb-ncm

The G&G CM16 Raider  replica is part of the  Combat Machine Range,  The Combat Machine replicas are of high quality.  The main factor allowing to lower the price is the use of a high quality plastic bodys instead of a metal body. It is also a important fact that the body itself was made of plastic reinforced by fiberglass  - just like the front Rail, the stock or almost all plastic elements. The outer barrel, the stock’s pipe, the tactical sling attachment points, the magazine casing and most of the minor elements were made of metal. The replica is equipped with a reinforced Metal V.2 Gearbox with 8mm ball bearings.

0.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG SRT09AKTan

 The Spartac SRT-09 has a metal V3 gearbox and   a majority of the main components of the replica was made of plastic. The magazine, mock gaspipe,  the stock, pistol grip, front guard together with an upper hand guard,  The outer barrel, fire selector and the sling catch are made of steel. 

165.00 *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG CM032Olive

The Cyma M14  is made of metal and ABS. Stock and barrel  are made of   ABS.
Sights , barrel, magazine and sling swivels are made of metal. 
There are 3 variations  Black, Wood and Olive. 

195.00 *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG SA-B06

The  SA-B06 is  made ​​largely of  alloy of zinc and aluminum, with steel elements such as  bolts, pins and and tactical sling). The solid stock  and the pistol grip are  made ​​of a polymer plastic. 
The replica is very well well made normallly only seen with  G & P or Classic Army.

210.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG CM048

CM048 is made of metal and Wood.
The Gun has a metal hop up unit and metal body.
Excellent  build quality.

260.00 *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG G&G EGC-18P-MD1-DNB-NCM

The  G&G CM18 Mod 1   is part of the  Combat Machine family of replicas, A High qualiy replica as expected from G & G.
The body is made
 with high quality plastic, instead of metal. Parts  made of metal  are the outer barrel, stock tube and most small parts.

230.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG SC-01 Black

The SC-01 is made mostly of strong and durable nylon. Ris rails, barrel, iron sights and magazine are made of metal. Folding stock with rubber cap is adjustable and storages battery. Replica uses standard M4/M16 magazines. Magazine catch and fire selector work both sides, what makes it perfect assault rifle for left and right-handed. Flip-up iron sights are adjustable and made of metal.

249.99 *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG SC-02-BLK

The SC-02 Scar   is made of ABS and metal elements. The RIS rails, sights, magazine, barrel and some of the elements of the body are made of  CNC machined aluminum. The body and the folding stock of the airsoft gun are made of ABS. The material is a durable nylon fiber, which is exactly the same, as the one used for the manufacture of the real steel. The method of using the materials imitates the construction of the original. The Stock  folds to the side and is of  adjustable length, which is also equipped with an adjustable cheek riser. The airsoft gun has a magazine catch that enables to detach the magazine from both sides of the rifle and an ambidextrous selector lever.

225.00 *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG SC-01 TAN

The SC-01 is made mostly of strong and durable nylon. Ris rails, barrel, iron sights and magazine are made of metal. Folding stock with rubber cap is adjustable and storages battery. Replica uses standard M4/M16 magazines. Magazine catch and fire selector work both sides, what makes it perfect assault rifle for left and right-handed. Flip-up iron sights are adjustable and made of metal.

249.99 *

Currently unavailable. Contact us if you want to pre-order this product.

*

Prices incl. VAT.

1 - 50 of 55 results