G&G

G&G

G&G was established over 20 years ago and have increased from strenght to strenght, G&G has won a number of awards including best airsoft manufacturer.
The production of the Pneumatic Blowback M4  launched them on  gobal success and then the introduction of their CM ( Combat Machine)  range. Also G&G produce a higher  end products under the name of TOP TECH.
G&G produce well designed and quality products. 

 


Display per page
Sort by
Product no.: AEG G&G egc-16p-car-bnb-ncm

The G&G CM16 Carbine  replica is part of the  Combat Machine Range,  The Combat Machine replicas are of high quality.  The main factor allowing to lower the price is the use of a high quality plastic bodys instead of a metal body. It is also a important fact that the body itself was made of plastic reinforced by fiberglass  - just like the front grip, the stock or almost all plastic elements. The outer barrel, the stock’s pipe, the tactical sling attachment points, the magazine casing and most of the minor elements were made of metal. The replica is equipped with a reinforced Metal V.2 Gearbox with 8mm ball bearings.

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG G & G egc-16p-rds-bnb-ncm

The G&G CM16 Raider  replica is part of the  Combat Machine Range,  The Combat Machine replicas are of high quality.  The main factor allowing to lower the price is the use of a high quality plastic bodys instead of a metal body. It is also a important fact that the body itself was made of  reinforced plastic   - just like the front grip, the stock or almost all plastic elements. The outer barrel, the stock’s pipe, the tactical sling attachment points, the magazine casing and most of the minor elements were made of metal. The replica is equipped with a reinforced Metal V.2 Gearbox with 8mm ball bearings.

0.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG G&G egc-16p-rdl-bnb-ncm

The G&G CM16 Raider  replica is part of the  Combat Machine Range,  The Combat Machine replicas are of high quality.  The main factor allowing to lower the price is the use of a high quality plastic bodys instead of a metal body. It is also a important fact that the body itself was made of plastic reinforced by fiberglass  - just like the front Rail, the stock or almost all plastic elements. The outer barrel, the stock’s pipe, the tactical sling attachment points, the magazine casing and most of the minor elements were made of metal. The replica is equipped with a reinforced Metal V.2 Gearbox with 8mm ball bearings.

0.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG G&G egc-16p-rds-dnb-ncm

The G&G CM16 Raider  replica is part of the  Combat Machine Range,  The Combat Machine replicas are of high quality.  The main factor allowing to lower the price is the use of a high quality plastic bodys instead of a metal body. It is also a important fact that the body itself was made of  reinforced plastic   - just like the front grip, the stock or almost all plastic elements. The outer barrel, the stock’s pipe, the tactical sling attachment points, the magazine casing and most of the minor elements were made of metal. The replica is equipped with a reinforced Metal V.2 Gearbox with 8mm ball bearings.

0.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG G&G egc-16p-rdl-dnb-ncm

The G&G CM16 Raider  DST replica is part of the  Combat Machine Range,  The Combat Machine replicas are of high quality.  The main factor allowing to lower the price is the use of a high quality plastic bodys instead of a metal body. It is also a important fact that the body itself was made of plastic reinforced by fiberglass  - just like the front grip, the stock or almost all plastic elements. The outer barrel, the stock’s pipe, the tactical sling attachment points, the magazine casing and most of the minor elements were made of metal. The replica is equipped with a reinforced Metal V.2 Gearbox with 8mm ball bearings.

0.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG G&G egc-16p-fhk-bnb-ncm

The G&G Fire Hawk made under the Combat machine range, it  is made of high quality materials  like all the G&G range, it is fitted with a the GOS V2 stock.  This has G&G's high build quality, with 8mm bearings in its V2 gearbox.
This replica is suited to short distances / C
QB.  Great Rate of fire and distinct loud sound. 

220.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG G&G egr-15p-rds-bbb-ncm

The GR15 is made from high quality plastic and metal. It uses a pneumatic blow back system that does not  wear or put stress on parts of the gearbox.  
It  is recommended that you do not use higher than an 8.4v battery as higher voltages may cause damage to the blowback. 
This  replica does not come with a batery or charger.

0.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG G&G EGC-18P-MD1-DNB-NCM

The  G&G CM18 Mod 1   is part of the  Combat Machine family of replicas, A High qualiy replica as expected from G & G.
The body is made
 with high quality plastic, instead of metal. Parts  made of metal  are the outer barrel, stock tube and most small parts.

230.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG G&G EGC-16P-RDS-BNB-NCM

The G&G CM16 Raider  replica is part of the  Combat Machine Range,  The Combat Machine replicas are of high quality.  The main factor allowing to lower the price is the use of a high quality plastic bodys instead of a metal body. It is also a important fact that the body itself was made of plastic reinforced by fiberglass  - just like the front Rail, the stock or almost all plastic elements. The outer barrel, the stock’s pipe, the tactical sling attachment points, the magazine casing and most of the minor elements were made of metal. The replica is equipped with a reinforced Metal V.2 Gearbox with 8mm ball bearings.

189.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG G&G EGC-16P-RDS-BNB-NCMCombo

The G&G CM16 Raider replica is part of the Combat Machine Range, These are  high quality and possibly the best in there price range.  The body, rail and stock is made of plastic reinforced by fiberglass . The outer barrel, the stock’s pipe, the tactical sling attachment points, the magazine casing and most of the minor elements were made of metal. The replica is equipped with a reinforced Metal V.2 Gearbox with 8mm ball bearings.
Smart Charger &  1600 9.6v Battery Included

235.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG CM15KRLPR13CarbineBGrey

CM15 KR-LPR 13 "replica rifle  - Battleship Grey

The  CM15 KR-LPR 13 " rifle from G & G was made as part of the Combat Machine series. , which aims to provide high-quality replicas at a good price. The main factor allowing to reduce the price is the use of a body of high-quality glass fiber reinforced plastic instead of metal. Made of plastic are the body, pistol grip, and Keymod rail system. The metal parts are the external barrel, a stock guide, sling mounts and most of the small elements.  

219.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

Product no.: AEG G&GCM16Raiderv2

CM16 Raider 2.0 Carbine

A CM16 Raider 2.0 carbine rifle replica by G&G made as a part of the Combat Machine project whose aim is to deliver high-quality replicas at a price that may be considered economical. Combat Machine replicas are characteristic for their highest, distinctive of G&G products, craftsmanship, reliability and high quality of materials used. The main factor that allows reducing the price is the use of a high-quality glass fiber reinforced polymer instead of metal.

Polymer parts include the receiver, pistol grip, M-Lok rail, stock, and muzzle. Metal parts, on the other hand, include the external barrel, stock tube, latches and majority of small elements.

The replica is perfect for operating on a medium-range with a muzzle velocity of ~ FPS. The implemented top RIS rail allows for the attachment of any optical sight, whereas a telescopic stock, which holds the battery, allows for adjustment of the replica to the preferences of an individual User. The set includes a kit of flip-up iron sights.

The set does not include a battery or a charger.

189.00 / unit(s) *

Currently unavailable. Contact us if you want to pre-order this product.

*

Prices incl. VAT.